dynamipsstore's blog

Since nested virtualization is either not supported or is a very difficult procedure, neither the Eve-NG implementations nor Azure actually worked.

Why was Eve-NG deployed in the cloud?

It takes a lot of RAM and CPU power to virtualize the kind of routers that can operate these cutting-edge DC technologies. Additionally, there is no need for these routers to consume energy constantly.

To access the console, first, create a free Google Compute Engine account.

You should see something somewhat similar after activating it. From an Ubuntu base image, we must develop a custom image that supports virtualization, from which we may build the system and install eve-ng on google cloud as needed.

You should see a custom graphic with the status = "READY" once the command has finished running. You are now prepared to construct a Google Compute VM instance after the process is finished.

As needed, create the instance.

Give it as much RAM and CPU as you'd like, then click "Change" under Boot Disk to finish.

In order to accommodate all the photographs to send to Eve-NG for virtualization, chose a bigger HD. Now specify the custom image you made with vmx enabled.

So that you can use eve ng server web panel, and permit HTTP traffic. Get a static public IP so you can start and stop your instance while maintaining the same static public IP.

Continue by following the remaining instructions to grant root access to your system over SSH from any location in the world. Decide on a root password. Allow Root Login. Decide to yes for Password Authentication. Save, then exit. Relaunch the sshd service. Continue with the remaining instructions to finish installing Eve-NG on top of Ubuntu. Revisit the grub. Change the interface's name to eth0 on boot by editing the following file. If you restart the computer, eth0 should be present. Update and improve. Reboot after executing the install command.

You have a variety of choices for setting up your own Cisco SD-WAN lab. Your best option right now is EVE-NG. Every step of setting up EVE-NG is easy and creating your own Cisco SD-WAN lab is very quick. This comprises:

downloading the necessary eve ng online lab and Cisco images

putting in EVE-NG

putting in the photos on your EVE-NG setup

checking your ability to use the images

EVE-NG can be run on real hardware, a KVM or VMWare hypervisor, or both. The EVE-NG requirements page has more information on cisco ise eve ng. It will be set up on VMware ESXi 7, of course. The Cisco SD-WAN and EVE-NG images must be downloaded in order to get started.

Cisco account setup

You need to have a CCO account with a contract in order to download the Cisco SD-WAN images. The photos are accessible through Cisco's Software Download. Cisco SD-WAN can be used with a variety of operating systems, including Microsoft Azure, VMware ESXi, and KVM. For EVE-NG, we need the KVM images.

From the download page, you can get EVE-NG. There are two possibilities

Community Edition Version Professional/Learning Center Version. The professional version's ISO download is best for the following two reasons:

The most recent version.

You can add and remove links without logging off of virtual devices.

The professional version costs money but is unquestionably worthwhile. Transfer the ISO file to your VMware ESXi server's datastore. We must first build some additional port groups before we can create the virtual computer.

The EVE-NG virtual machine's eth0 interface is connected to the first port group (LAB). We use this so that we may connect to the SSH server or the EVE-NG GUI. The other three port groups are connected to various EVE-NG "cloud" networks. These can be used as a bridge between our real network and virtual devices. Every port group makes use of a distinct VLAN. These cloud icons are helpful for SD-WAN because we'll be simulating various WAN connections using them.

Presented as a virtual appliance, FortiGate-VM is a fully functional FortiGate. For top virtualization, cloud, and SDN platforms like VMware vSphere, Hyper-V, Xen, KVM, and AWS, the fortigate vm download virtual appliance is the best option for keeping an eye on and enforcing virtual traffic. To offer flexible and quick network security services to virtual workloads, FortiGate-VM may be orchestrated in software-defined environments. You may evaluate the user-friendly web interface and contextual displays, and know how to deploy firewall, intrusion prevention, VPN, antivirus, and other unified security services to virtual workloads.

The deployment package for FortiGate-VM can be downloaded. The Customer Service & Support website offers FortiGate-VM deployment packages. To access the VM deployment packages that are offered, choose VM Images from the Download drop-down option.

Choose FortiGate from the drop-down menu labeled "Select Product."

Pick VMware ESXi from the drop-down menu labeled Select Platform.

Choose the FortiOS release that you want to download.

Both the file needed for a new deployment and the file needed to upgrade from an earlier version of eve ng ise are available for download.

Save the file by selecting the Download button.

After selecting the ASAv Symbol, click OK.

The console type can be changed to vnc by selecting it from the drop-down menu.

for the console type, select "VNC"

Uncheck the box for a linked base VM.

For the base VM that goes with ASAv, uncheck the box.

This option allows newer instances to inherit the global settings, hence it is advisable that all necessary adjustments be performed before choosing it. We shall carry out each assignment as the final stage once we have finished it. In comparison to other integrated programming environments like PyCharm, Sublime Text, or Sublime Text 2, you may prefer Microsoft Studio Code if you're used to utilizing Microsoft products.