davidbrown19's blog

Are you one of the Windows Users who came across a 0x800F0923 upgrade error? This error message usually emerges during the Windows 10 upgrade. You are able to download the update, while during the upgrade process, the Error Code 0x800F0923 attempts to block the action.

The Microsoft engineers claim the error to be a cause of incompatible device drivers with the Windows 10 operating system, and DuplexSecure’s SPTD drivers are supposedly the main culprit that triggers the issue most frequently.

Furthermore, other reasons for the 0x800F0923 error include low disk space, specifications lesser than the required, old hardware, etc. There are further causes that may result in this kind of upgrade error, and there are solutions to each cause. These solutions have been further conferred to help you get over such issues.

There are various methods you can use to trigger the 0x800F0923 upgrade error. Some of them are discussed below.

Having gone through the Windows 10 update, you might have encountered a 0x800F0923 error, blocking you from updating Windows. This may be dealt with by updating the existing device drivers on your system. You can do so by using the steps given below:

·        Click to open a Start menu and type and search for Device Manager. Click on it once you see the menu.

·        The Device Manager opens up on your screen. Now find the device driver you think is messing up with your Windows update.

·        Once you get the driver, right-click on it and select the Update Driver option.

·        If you want to update your graphics card, select the display adapters to expand the menu.

·        Find the name of your graphics card and right-click on it, then click on Update Driver.

·        Next, in the new window, click to select Search automatically for the updated driver software option, and follow the instructions on your screen. On finding a suitable update, it will be downloaded and installed on your PC.

·        If you cannot find the drivers, you can visit the manufacturer’s official website to find the relevant driver there.

Your windows upgrade blockage may have resulted due to the full disk space; therefore, you may consider freeing up your hard disk to clear one of the blockages in the upgrading process.

While attempting to update your Windows 10, you first need to check your PC’s compatibility with the operating system. To do so, you need to follow the steps given below:

·        Go to the Get Windows 10 logo at the bottom right corner of your monitor and right-click on it. Then click on Check your upgrade status.

·        Once the checking process gets completed, click on the three horizontal lines menu on the upper left corner of your screen and click on Check your PC option. Now, wait until the results show any incompatible drivers or software available in the system. Having found any incompatibilities you need to fix them manually or through the required process, and then try to run Windows 10 update.

You can also try troubleshooting the 0x800F0923 error by using the steps given below:

·        Go to the Startmenu and search for Settings.

·        Click on it to open the Settingswindow, and there select Update & Security.

·        From the menu in the left pane, select Troubleshoot.

·        Next, from the right side pane click on the Run the troubleshooteroption.

·        Now, follow the instructions on your screen.

STPD driver is one of the drivers that is a frequent culprit of triggering the 0x800F0923 error. You can fix the error by uninstalling the STPD driver. To do this, you can consider following the steps given below:

·        Click to open a Start menu and type and search for Device Manager. Click on it once you see the menu.

·        The Device Manager opens up on your screen.

·        Find the driver you seek to uninstall. On locating it, right-click on it and click on Uninstall driver option.

·        A small window opens up. Click on Uninstall to continue with the process.

There is an alternative method of uninstalling the STPD driver via the Windows registry. This method includes the following steps:

·        On your keyboard, press the shortcut Windows + R.

·        A Run dialog box opens up. Here, type regedit and click on OK.

·        Next go to HKEY_LOCAL_MACHINE\\System\\CurrentControlSet\\Services\\Sptd.

·        On the right side of the pane, click on Start DWORN.

·        Here, set the value as 4 and then click on OK.

Must Read :- Issues Regarding  mouse stuttering windows 10

It’ll help streamline operations for small businesses.

Canon has released its new imageFORMULA DR-C225 II document scanner that’s designed to help small enterprises staying efficient. Canon U.S.A., Inc is the leader in digital imaging solutions and excitedly added the latest office document scanner to its portfolio.

Receipt Bank powers this new Small Business Edition scanner. This scanner can provide high-quality and innovative features When joined with the Dext Prepare, including Receipt Bank software that’ll help customers converting paper-based documents into digital files. One can easily track bank statements and business invoices, as well as scan receipts.

imageFORMULA DR-C225 II scanner is designed to assist entrepreneurs in removing or decreasing the requirement to enter invoices and receipts manually, which is red by Receipt Bank utilizes Dext’s high-quality software to let users extracting data from docs and scanning into bookkeeping or accounting such as Xero, QuickBooks, and Sage.

It delivers high-quality imaging and adds some other features like Optical Character Recognition, generally known as OCR, to help to design editable as well as searchable information and auto resolution settings so the user can scan mixed batches of photographs and documents.

It also offers flexible, dynamic feeding and high-quality imaging. Prepared to look over to 25 pages per min in grayscale or color, white and black, including certain thin, long, thick, and oversized documents, and embossed or plastic cards.

Because of its upright, innovative, space-saving design, the imageFORMULA DR-C225 II scanner is fitted to small office spaces and surrounds that may have limited desk space. This device meets ENERGY STAR guidelines and currently has an EPEATR Silver rating as well.

The imageFORMULA DR-C225 II scanner is available to purchase now with MSRP: $449. You can visit Canon U.S.A, Inc., an official site, to buy it.

Must Read :- Issues Regarding  canon g7020 error code 5200?

Windows update is a way to keep your operating system and other Microsoft products updated so that users can get the benefits of all the latest features. However, Windows update also gets subjected to several recurring update errors.

The most commonly occurring Windows update error that you may come across is “Windows Update Service Not Running.” Sounds familiar? Then let’s introduce you to some of the fixes you can take up to outdo the frequently occurring error on your PC.

Given below are some of the effective methods to deal with the “Windows Update Service Not Running” issue on your PC:

Any issue that gets triggered on your PC should first be tried to be dealt with by restarting your PC. Restarting helps to wipe out the system memory from the computer. 

Windows 10 comes equipped with the inbuilt troubleshooter that on being run, helps you diagnose the issues with your PC and eventually eliminate them. To use the troubleshooter, you need to take the steps given below:

·        Firstly, go to the Start menu and open Settings.

·        Now, click on Update & Security.

·        On the left side pane, click on Troubleshoot.

·        Now click on the Additional troubleshootersoption.

·        Then, select Windows Updateand click on Run the troubleshooter.

If the Windows troubleshooting doesn’t prove of any help, you should check whether it’s set up to run automatically on your Windows. To proceed, you need to check out the steps given below:

·        Open the Runbox by pressing Windows + Ron your keyboard.

·        Now, type services.msc, and then click on OK.

·        Next, go to the Windows Updateoption, right-click on it and open its Properties.

·        In the Properties window, change Startup Typeto Automaticand then click on the Applybutton.

·        Then set the Service Statusto Running, and click on OK.

·        Repeat steps 3-6 to set the following:

o  Background Intelligent Transfer Service

o  Cryptographic Services

·        Lastly, restart your PC and check if the error has been resolved.

You should considerably run an antivirus to check if the virus has invaded your system leading to the “Windows Update Service Not Running” error on your PC. You can use any antivirus program to scan your PC for viruses.

If your system is loaded with a third-party firewall utility, your Windows update may get blocked causing the issue. You can, however, get rid of this by disabling the Firewall and uninstalling the available antivirus software, and then check if the error persists.

You can do this using the instructions given below:

·        Firstly, open the Rundialog box using the keyboard shortcut keys Windows + R.

·        Now type temp on the available field and hit enter.

·        A Windows Explorer opens up with all the existing temp folders.

·        Select the files in the temp folder and delete them all.

Must Read :- Issues Regarding   windows modules installer worker high disk usage.

It can be very frustrating when you need to complete a crucial printing project and your Epson printer isn't printing as requested.Sometimes Epson printers stop printing suddenly. This problem is not a matter of just Epson printers, however it may be the case with any printer because of various technical reasons. Printer users might suddenly experience issues printing. There are many causes for this issue in the printer. Many of the issues can be fixed easily by you. Learn more about this article.

It is sometimes possible that the Epson printer is not printing properly can be caused by a simple and straightforward cause. Therefore, it is recommended to conduct a quick check before trying to troubleshoot the printer using difficult technical steps.

●  Make sure that the printer is Active

●  The Printer Is Connected To The Computer Through USB

●  Verify that the Ink Cartridge is Set Properly

●  Verify if You Have Paper Correctly inserted into the Tray

●  Check to ensure that the Printer Isn't Sending An Error Signal

●      Clean the Printhead of Your Epson Printer

Epson printer is not printing properly could occur when the printhead is not properly cleaned. In some cases, due to the lower use of the printhead, Printhead get clogged. It is necessary to clean the printhead before you can perform the printing. Every printer comes with an inbuilt equipment for cleaning the printer head, so there is no need to be concerned about this. To clean your printhead, follow the steps listed below.

Step-1

1. Place a plain piece of paper in The Tray.

2. Find "Control Panel" in the"Search" Box on the Taskbar Then open it.

3. Click on Printers and Devices.

4. Right-click on your Epson Printer and select Printing Preference from the Options Menu.

5. Click on The Manage Tab.

6. Then click on Head Cleaning.

7. Click Now to Start.

8. Follow the on-screen instructions.

Step-2

1. Put a plain paper in The Tray.

2. Click Here To Access Mac OS Desktop. Mac OS Desktop.

3. Click on Apple Menu and then go to System Preferences.

4. Click on Printer And Scanner.

5. Now click on the printer and click on Options and Materials.

6. Click on Utility Tab and Click"Open Printer Utility.

7. Then click on Head Cleaning.

1. Cleanse all the Printhead from Your Epson printer.

2. Place the printed paper in the tray of your Epson tray for your printer.

3. The control panel is the main menu on Your Windows computer's search option, which is located on the taskbar.

4. Then, you will have to select"Printers and Tablets" from the "Printers and Tablets" option by clicking it.

5. Pick Computer & printer from the "Objects control panel" in Windows 10.

6. You must Right-click to open the Epson printer and choose"Print" from the menu Options.

7. After that, Right-click the non-printing Epson printer, and then select the print preferences option.

8. Then you'll be able to hit the button "Manage icon".

9. Then, you'll be able to see you will see the "Epson Printer Preferences Maintenance" page. Click on it.

10. For Epson Printer Repair, press on the "Head Cleaning" option.

11. Simply press on the "Start" key.

12. To fix the "Epson printer not printing" problem  click"Start" or the "Start" option to initiate the head cleaning.

13. Finally, follow the on-screen instructions to finish it.

1. Print a basic piece of paper into the tray in your printer.

2. Now, start Your Mac computer.

3. Following that, Tap on the Apple Menu and then go to "Machine Setting".

4. On your Mac Click on its "Apple Menu" and then choose"Apple Menu", then click on the "Device Preferences" option.

5. Then, click to"Scanner and Printer "Scanner and Printer" option it will show you.

6. Within the Device Preferences option, click to select"Printers and Scanners" under the "Printers as well as Scanners" option.

7. Then, select then the Epson printer that won't print and then select the mac "option and supplies" option.

8. Now, click on the Utility tab first , and then click"Open" and then press the "Open Printer Utility" button.

9. Then then select"Utility" and then click on the "Utility" tab, and then open"Mac Printer Utility. "Mac Printer Utility".

10. Then, select"Head Cleaning" or the "Head Cleansing" option that you will see.

11. Under Printer Utility Click on"Printer Utility," then click the "Head Clean" option to fix error Epson printer that isn't producingerror.

If you've installed multiple printers on your computer, it may also block you from printing with your Epson printer from producing. To fix this issue, you'll need do the following "Set Your Epson printer to default settings" on your computer. do this in these ways.

1. On Your Windows 10 computer, click on the "Start" button and then select the Settings.

2. Click to"Printer and Scanners." Tap on the "Printer & Scanners" choice that you will see.

3. Then, navigate to your "Devices" option, and then choose "printers or scanners".

4. Then, click next to "Select Your Epson Printer" from the printer's menu after which click"Manage" "Manage" link.

5. Finally, you'll need to click the "Set as default" button to complete the procedure.

Noteto uncheck the checkbox If you've not seen the "Set as default option".

You've now set up the Epson printer to become the default printer on your computer. Print a document now. You can fix the Epson printer  that isn't printing on your computer..

Must Read :- Issues Regarding  Epson Driver is Unavailable?