What Are The Requirements For Processing Materials For Metal Stamping Parts from freeamfva's blog

What Are The Requirements For Processing Materials For Metal Stamping Parts

When selecting the materials for stamping parts, not only should we consider the application function, but also we should be satisfied with the stamping process and the subsequent process function request. The following Xiaoshuo takes you to take a look at the basic requests for information on stamping processing as follows.To get more news about Metal stamping parts, you can visit tenral.com official website. 

1. There are good stamping and forming functions for metal stamping parts. For example, stretching, bending, stepping, convex hull, etc., there should be good stamping and forming functions, that is, good crack resistance and good adhesion. Moldability and formability, otherwise the product will easily deform, break, etc., causing the difficulty of repairing the mold. For separate processes, there is a certain degree of plasticity in the requested data. 

2. There is a higher nominal quality of the metal stamping parts. The nominal name should be smooth, flat, and free from defects. The materials with good nominal quality are not easy to break during molding, and it is not easy to scratch the mold. The nominal quality of the parts is also good. 

3. The thickness tolerance of the stamping parts data should conform to the national scale. Since the certain die gap is only used for the data of the certain thickness category, if the thickness tolerance of the data is too large; it not only directly affects the quality of the parts, but also may lead to the presentation of the finished product. In the process of correcting zigzags and reshaping, there may be damage to the mold or the press due to the excessive thickness deviation.


Previous post     
     Next post
     Blog home

The Wall

No comments
You need to sign in to comment